Latest News

Removing blinds can be a straightforward task, but depending on the type and mounting system, some blinds may require extra care and attention.

Below, we’ll go into detail on how to remove blinds of various types, including troubleshooting tricky brackets, dealing with delicate materials, and preventing damage to your window frame.

How to Remove Venetian Blinds

Venetian blinds consist of horizontal slats made from wood, aluminum, or PVC, which are suspended by cords and mounted on a headrail. Their removal can vary based on how they are fixed to the brackets.

Step 1: Prepare the Blinds for Removal

Before attempting to remove the blinds, fully close the slats using the tilt wand or cord. Then, pull the blinds up so that all the slats are stacked at the top. This makes them more manageable and reduces the risk of damaging individual slats.

Step 2: Identify the Bracket Type

Venetian blinds are commonly attached with either standard brackets, hidden brackets, or clip-in brackets:

• Standard Brackets: These have a simple clip mechanism or screws that hold the headrail in place.
• Hidden Brackets: Often found in modern aluminum Venetian blinds, these brackets are concealed behind the headrail for a seamless look.
• Clip-In Brackets: These use plastic or metal clips that snap into place, typically seen in lightweight blinds.

Step 3: Removing the Headrail

• For standard brackets:
  • Open the bracket covers or release the clips holding the headrail.
  • Gently pull the headrail forward and lift it out.
• For hidden brackets:
  • Insert a flathead screwdriver between the headrail and the bracket.
  • Push or twist gently until the headrail disengages. Be careful, as forcing the screwdriver can bend the bracket or dent the aluminum headrail.
• For clip-in blinds:
  • Unclip each section carefully while holding the blinds steady to avoid them suddenly dropping.

Pro Tip: If the brackets are difficult to open, apply slight pressure with the screwdriver while pulling the headrail outward. If the blinds have been installed for a long time, they might be stuck due to accumulated dust and dirt.

How to Remove Roller Blinds

Roller blinds are one of the easiest types to remove, but roller blinds with hidden brackets may require extra care. The removal process depends on whether your blinds have an exposed or concealed fixing system.

Step 1: Roll Up the Blind

Rolling the blind up fully reduces tension in the fabric and prevents it from flopping around during removal.

Step 2: Identify the Side Mechanism

Roller blinds are usually held in place by a spring-loaded pin system on one end and a bracket with a retaining clip on the other.

• Standard brackets:
  • Locate the spring-loaded pin (typically on the opposite end of the control chain).
  • Push the blind towards the spring-loaded end, allowing the other side to slide out of the bracket.
• Hidden brackets:
  • Use a flathead screwdriver to press the release tab.
  • Once disengaged, gently slide the blind out.

Pro Tip: If the blind is stiff and won’t release easily, check for any screws securing the bracket and loosen them slightly before trying again.

How to Remove Vertical Blinds

Vertical blinds are composed of individual fabric or PVC slats attached to a headrail, which is mounted on brackets above the window.

Step 1: Remove the Slats

• Rotate the slats to a half-open position – this makes it easier to unhook them.
• Unclip each slat from the headrail by lifting them out of the clips. Some may have a small tab that needs to be pushed to release the slat.

Step 2: Detach the Headrail

The headrail is typically fixed with either screwed brackets or snap-fit clips.

• If the brackets have screws, use a screwdriver to loosen them, then slide the headrail out.
• For clip-in headrails, press the release tabs while pulling the rail forward.

Pro Tip: Be gentle when pulling the headrail away, as some brackets may be stiff due to age or paint buildup.

How to Remove Wooden Blinds

Wooden blinds tend to be heavier than other types, so removal requires extra care to avoid damaging the slats or scratching the window frame.

Step 1: Lift the Blinds and Secure the Slats

• Fully raise the blinds using the pull cord to stack the slats at the top.
• If your wooden blinds have hold-down brackets at the bottom, unclip or unscrew them first.

Step 2: Remove the Headrail from the Brackets

• Open the bracket covers to expose the screws holding the headrail in place.
• Use a screwdriver to loosen the screws and gently lift the headrail out.

Pro Tip: Wooden blinds are delicate, so avoid bending the slats while removing them.

How to Remove Roman Blinds

Roman blinds are made from fabric and are mounted on a corded or motorised headrail.

Step 1: Lower the Blinds

• Fully extend the fabric to prevent tangling.

Step 2: Detach the Fabric from the Headrail

• Some Roman blinds use Velcro strips to attach the fabric to the rail.
• Others have plastic clips or hook-and-loop fasteners that need to be undone.

Step 3: Remove the Headrail from the Brackets

• Identify the type of fixing:
  • Standard brackets – Unscrew the headrail from the wall.
  • Hidden brackets – Press the release tab and slide the headrail out.

Pro Tip: Handle the fabric carefully to prevent creasing or damage.

How to Remove Horizontal Blinds

Horizontal blinds, including faux wood or aluminum, are similar to Venetian blinds but often have a sturdier frame.

Step 1: Secure the Slats and Lift the Blinds

• Tilt the slats closed and raise them to the top.

Step 2: Release the Headrail

• Locate the brackets at either end of the headrail.
• Use a screwdriver to open the bracket clips and pull the headrail forward.

Pro Tip: If the brackets are painted over, use a blade to score around the edges before removing them.

Removing blinds may seem simple, but each type has its own challenges. The key points to remember are:

Identify the bracket type before removing the blinds. Use the correct tools and release clips carefully to prevent damage. If dealing with hidden brackets, a flathead screwdriver is your best friend. If you’re replacing your blinds, explore Aspiration Blinds’ collection for stylish, high-quality replacements:

With this detailed guide, you should have no trouble removing any type of blinds safely and efficiently!